Marvel Spartan 93 Ton Ironworker, Model MSIW93D – NEW
Technical Specs
Catalog ItemYes
Description
Marvel Spartan 93 Ton Ironworker, Model MSIW93D – NEW
Asset #16432N
Serial #MSIW93D-270
STANDARD SPARTAN MSIW93D HEAVY-DUTY, DUAL CYLINDER, COMPLETELY INTEGRATED IRONWORKER WITH 93 TON CAPACITY, 10 H.P., 14” THROAT, 5 WORK STATIONS, AND SIMULTANEOUS DUAL OPERATION
Capacities & Specifications Rated on 65,000 PSI Tensile
PUNCHINGPunch Pressure: 93 tons.Punch Holder and Jog ModePunch Work Table: Includes back gauge and adjustable stops.Adjustable See-Through Punch Stripper: For fast and easy setup.Die Holder: Adjustable in machined T-slots for quick punch and die alignment.Standard Tooling: 1-1/2” in 3/4”.CPD Series: 26 punch, 62 die.Large Tooling: 2″ in 9/16”.CPD Series: SP51P punch, SP80D die.Optional Oversize Tooling: 4-5/16” in 1/4” material.Throat Depth: 14”Stroke Length: 3-5/32”.Cycles per Minute in 3/4”: 25.Punching Station Work Height: 42-1/2”.FLAT BAR SHEARINGFlat Bar Shear Capacity: 18” in 9/16”.Maximum Width x Thickness: 14” in 3/4”.Lower Blade: Four (4) usable edges.Support Table: Includes guides for accurate positioning and indicator lines at 30 and 45 degrees left and right.Adjustable Hold-Down: Holds work piece securely in position when shearing.Upper Shear Blade: Provides for minimum distortion. Two (2) usable edges.Blade Length: 19”.Angle Flange Trim: 4-3/4”.Flat Bar Shear Work Height: 37”ANGLE SHEARINGMaximum Capacity – 90 degrees: 6” x 6” x 9/16”.Maximum Capacity – 45 degrees: 3” x 3” x 5/16”.Shearing with no material loss and minimum deformity.Shear Blades: Four (4) usable edges.Angle Shear Work Height: 47-1/4”. | BAR SHEARINGRound Bar Max. Capacity: 2”.Square Bar Max. Capacity: 2” x 2”.Six Cavity Round and Square Bar Shear Sizes:Round: , 3/4”, 1-1/8”, 2”Square: 1-1/4”, 1, 2”Channel Shear Max. (optional): 6”.I-Beam Shear Max. (optional): 6”.Bar Shear Work Height: 47-1/4”NOTCHINGRectangular Notcher: 2” x 4” x 1/2”.Electrical Interlock Safety GuardGauge Table with Stops: For precise positioning.Notcher Work Height: 37”.OTHER STANDARD EQUIPMENTFive (5) Sets of Punches and Dies:Punches: 9/16”, 11/16”, 13/16”, 15/16”, 1-1/16”|Dies: 19/32”, 23/32”, 27/32”, 31/32”, 1-3/32”CPD Series: 26 punch, 62 die.Magnetic Base Work LightAdjustable Electric Back Gauge (36”)24 Volt DC Control VoltageScrap Boxes at Punching and Notching StationsAdjustable Stroke Depth at PunchTwo (2) Full-Control Foot PedalsTwo (2) Hole Die HoldersTwo (2) Piece Gauging Table at Punch StationKeyed Punch Holder for Shaped ToolingStandard Voltage 230/460 Volt, 3 Phase, 60HzSingle Phase Machines: Not Available.Machine Net Weight: 5200 lbsMachine Dimensions: 75” L x 39” W x 74” H |
REF: 001186